OBERON Bar End Turn Signals Kit: Ducati Panigale 899-959-1199-1299, V2 [Mirrors are sold separately]
Kit consists of two Oberon bar end turn signals and a pair of threaded handlebar mounts designed for the 1299/1199/899/959 Panigale.
This kit is designed specifically for the Ducati Panigale. Instead of
using the typical expanding collet design we designed a large hollow
bolt that threads into the handlebar. The main reason for this is to save you from damaging your internal
threads on your handle bar. The additional benefit is an easier installation
since the bolt use is much larger and therefore easier to pass the wires
through. If you already have Oberon turn signals you can order just the adapters
- Improved motorcycle safety
- Highly visible mounted on end of handlebars
- Extra wide angle viewing pattern
- Visible from both front and back
- Instant illumination of indicator
- Small current draw
- Billet Aluminum
- High power amber indicator LED
- Elegant design
- Stainless steel fasteners
By using 8 high power wide angle LED on each side of the circuit board the indicator is visible from both the front and back at the same time with equal luminosity. This has a substantial improvement on the
visibility of the indicators which adds highly to the safety of the motorcycle and rider. Mounting on the end of the handle bar provides the greatest opportunity to be seen. LED's offer a much longer life than ordinary filament indicator bulbs.
Often LED's last longer than the motorcycle in which they are fitted. With the small current draw of LED's battery life is improved. LED's do not have a time delay on operation so they are instantly on at full power.
One of the most common complaints of aftermarket motorcycle indicators is the quality of the lenses. Our unique lens envelopes the LED circuit board completely by 360 degrees providing a melt proof, shake proof and loss proof cover.
These indicators are CNC machined from billet aluminum and are available
anodized black or silver. The Indicator body size: 50mm long x 35mm dia.
"CRG Blindsight Mirror" pictured is not included.
-'CLAMP' STYLE MIRRORS MUST BE PURCHASED SEPARATELY-
We offer several options for these turn signals to make sure you have everything you need and you aren't paying for parts you don't need.
Posi Lock connector kit: We started offering this kit when we noticed we had to cut off normal butt connectors when ever we needed to remove the turn signals. This kit makes it faster to remove the turn signals and saves you from having to cut anything.
7/8" versus 1" Handlebar: These turn signals will come with an expanding brass adapter and collets. If you have a 7/8" handlebar we will send you the collets needed to fit internal diameters of 12-19mm. If you select 1" handlebars we will send you a 22mm collet in addition to the ones needed for a 7/8" handlebar.
Resistors: We don't list this as an option but you may want to resistors in reduce the flash rate of the turn signals.
- IND-7814-1199 - I-6.1 + F-9.3
- I-6.1 + F-9.3
- Item Requires Shipping
- 5.0 lbs.
- W9.0000” x H6.0000” x L6.0000”
- Free Shipping - USPS or UPS
- FREE Shipping in the Continental US
Total Reviews (0)
You must login to post a review.
Write the First Review!