CORSE DYNAMICS Billet Captive Rear Axle Housing With Spools: Ducati Sport Classic, GT1000, & Paul Smart

This unique design offers many advantages over stock.

• All of the swingarm spacers are retained on the swingarm for easy wheel removal and re-assembly
• The outer housing includes an 8mm spool for secure lifting with a spooled rear stand.

This allows the use of a standard spooled rear stand to lift up the bike and remove the wheel, since all the spacers are bolted together through the swingarm the bike can still be supported on the stand utilizing the spool with the wheel removed. If you have ever removed the wheel on a sport classic you know that re-aligning all 9 spacers can become complicated and tricky, this kit will eliminate that headache completely.

Kit includes CNC machined left and right swingarm adjusters, 8mm spools, and required hardware to bolt the spacers together for a captive design. Inner spacers are hard anodized for durability.

*This kit will slightly limit the chain adjustment slightly since the bolts run through the chain adjustment slots, if you need the maximum amount of chain adjustment you will have to slot the chain adjuster on both ends for clearance.

Available in silver or black anodize.

Check the documents tab for a full 3D view of the part.


Very Important: The spools will need to have the "Blue Loctite" applied to them before installation[Not Included]!



Please note: The part installed on the Paul Smart in the two pictures is not the clear anodized version. The clear anodized is more of a Satin finish.