Brembo RCS 16 Radial Clutch Master Cylinder

o A 16x18 and 16x16 Brembo clutch master cylinder in one!
o Relocated knob adjuster like MotoGP
o Folding lever for mitigating crash damage
o Recommended with a Brembo 19RCS Brake Master Cylinder
o For standard sportbike 7/8" or 22mm diameter clip-ons



The RCS 16mm Brembo radial master cylinder has been designed for the rider who requires more clutch performance and variation in clutch lever feel when compared to a stock master cylinder.

The RCS offers flexibility to change the clutch lever ratio at the turn of a screw. This would enable the rider to decide on the 16 x 19 option normally used on the street or the 16 x 18 option which is suited to track day or amateur racing. This option is achieved by the use of an eccentric drive which is turned by the simple screw mechanism and has a color coded pivot rod end that allows the rider at a glance to understand the current setting.

Body- This Brembo clutch master cylinder is produced from a forged aluminum alloy and then partially CNC machined with a final finish of hard anodizing.

Piston- The piston seals and push rod are the same specification as the parts used in WSB and MotoGP offering exact tolerances .

Lever- Each Brembo radial master cylinder is fitted with a folding lever made from forged aluminum with a black finish and the Brembo racing logo. Levers can be purchased separately as half or full lever kits.

Please note: You will also need to purchase a Brembo RCS Clutch reservoir kit; That is unless you have a way to make a custom reservoir fit onto the master cylinder!

This master cylinder does not come with an activator switch and if your bike does come with one, then your circuit needs to be overridden by having the switch disconnected.