CORSE DYNAMICS Ride Height Rod: 748-998 / HM / MTS1000 / M620-695-M1000 / S2R-S4R-S4RS / S4
Rod ends feature a carbon fiber race offering greater strength than brass with no lubrication service ever needed.
This kit includes everything needed to replace the OEM ride height rod on the following bikes:
748 / 916 / 996 / 998 / Hyper / MTS1000 / M620 / M695 / M1000 / S2R / S4R / S4RS / S4
Adjustment range from 245mm - 295mm eye to eye, offering both longer and shorter adjustablility over stock.
Made in the USA.
- Item Requires Shipping
- 1.0 lbs.
- W12.0000” x H1.0000” x L1.0000”
Total Reviews (1)
Reviewed by: Stephen08/31/2017 08:39PM
Product ownership: A year or longer
Purchased from: Motowheels
I bought one of these so I could modify the suspension on my Ducati Monster 800. The rod and bearings have done over 70,000 Km since installed and the bearings are fine. Should I want to replace the bearings they are easy to source unlike the Ducati stock.
I know of one rod bending, it was installed on a Ducati ST4S, it was touring, loaded with panniers and pillion. The bike hit a pothole at speed bottomed out the suspension and bent the bar. The bike was nursed home from the trip. The rod was replaced via Motowheels as a faulty unit not properly heat treated.
Most adjustable Ducati rods seize within a couple of years and can't be adjusted. I have replaced them with this item and they have proved to be reliable and durable.
Remember, if you raise the ride height to take note of the extra chain slack so you don't over tighten the chain later by using the stock chain adjustment settings.
You must login to post a review.