Additional Images

DZUS 1/4 Turn Allen Q/R Fastener Kit : 848-1198

Dzus.kit.1098.allen - BOLTS
Pricing: $135.00


This 1098 quick release Dzus Allen Head kit eliminates 16 of the 22 bolts on the 1098. Speed up your access to the engine by over 75%.

Includes 16 Black Allen head DZUS pins to prevent pull through on race fairings. The long pin design is easy to use and is required to reach through the OEM plastic. The small allen head on this type of Dzus pin will clear many spots on the fairing and is a little more secure than a D ring when left unattended. 16 Dzus slide on retaining plates and Nylon washers are also included.

Instructions are included. Some drilling is required as a few holes must be expanded by 1mm for the large pin to fit.

Please Note: Two lower screws on each side and two under the nose is not changed. We may have a retrofit kit in the future for the other holes. This allen head provides better clearance on the two Dzus pins on the sides under the headlight fairing.

Options: There are three optional fittings that you can add to this kit. (1) Two fittings under the headlight fairing that attach the sides can be replaced with two allen type Dzus fittings. However you will need to bond the retainer plate in place since the fairing mounting point is small. (2) the screw near the kickstand can be replaced with a allen head Dzus as well. This spot gets a lot of vibration. You can loose the Dzus pin if it is not attached properly. In addition, it requires a different size tool so it may not be much of a time saver if you are using D rings. We made these optional since they are more difficult to install.

Race body work: All race bodies require different amounts of fittings. The CF 1098R body uses 20 fittings. You can order additional fittings ( pins and sliders) in the menu below.



Shipping Information

  • Item Requires Shipping
  • 0.5 lbs.
  • W2.0000” x H2.0000” x L2.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.